Delivery Time:3-5 days
Certification:CE,FCC,MSDS

Quick Dry Non - Toxic Glass Silicone Sealant  Weatherproof Anti - Mold 

Features

One-component, acetoxy type, curing at room temperature silicone sealant. Transparent, don\'t change color, good toughness, good elasticity, easy to application, fast curing, excellent weatherproof, anti-aging; Suit for variety of building materials and have good adhesive performance;
 
Main Purpose:

Use for structure\'s assembly of glass curtain wall. It can sealing the glass and metal\'s surface to a single assembly components directly. It can meet the requirement of fully-hidden or semi-hidden frame curtain wall design; It\'s suitable for the insulating glass structural\'s second layer\'s sealing. The site that particularly high requirements on the sealing performance, and multi-purpose ;

 
Restriction of Usage:  

Unsuitable used on the material\'s surface that leaking grease, plasticizeror solvent. It should be used in the ventilated places, because the silicone sealant need to absorb the moisture in the air for drying. Unsuitable used for frost or wet surface. Unsuitable used for construction on the material\'s surface that the temperature lower 6℃ or higher than 40℃. Unsuitable used for construction on the unclean and uptight substrate\'s surface. Unsuitable used for the interface of ground that bears the structural strength or the ground damage by excessive physical.

 

The hollow glass second layer sealing and joints ;


 
Main Technology Data:

Performance	Standard	Measured Value	Testing Method	Performance	Standard	Measured Value	Testing Method
Slumpability	Horizontal	Not change shape	Not change shape	GB/T 13477	Thermogravimetry(%)	≤10	7.5	GB/T 13477
Vertical(mm)	≤3	0	GB/T 13477	Tensile Modulus Mpa	>0.4	0.51	GB/T 13477
Extrusion ml/min	≥80	400	GB/T 13477	Tensile proper	No damage	No damage	GB/T 13477
Skin time min	≤180	12	GB/T 13477	Tensile recovery rate	≥80	94	GB/T 13477
Hardness(HsA)	20 - 60	27	GB/T 531	Storage	9 months shelf life if stored below 27℃ in cool and dry place after production.

 

Standard: GB16776 - 2005

 
Note: The actual usage amount maybe different due to the joint design, installation position of pad material, repairing skill and wastage in application.

 

Attention: Information published in this instruction is correct. However, but no means can it be considered and absolute guarantee, as usage and application of the product in accordance with the instruction given and success in application is beyond our control and is depend on many factors. Customers should have a good knowledge of product and make independent judgments of optimal usage before application.

 

Our Equipments: