Synthetic leather is not easy to wrinkle. When cleaning, you can choose the general shoe brush, but pay attention to the strength and do not use too much force. The leather is soft and easy to scratch, so it is best to choose a bristle shoe brush, which can clean the stains without damaging the shoes.

Lacquer leather is very easy to scratch. When cleaning, it is best to use horsehair shoe brush or soft pp plastic wire shoe brush. Remember not to use rough shoe brush, otherwise the shoes are easy to be damaged. When cleaning, the force should be even and gentle, and attention should be paid to protection.

The frosted leather is usually wear-resistant, so you can use a common shoe brush. If it is a frosted leather that is easy to fluff, you should choose a bristle or a soft pp plastic wire shoe brush.

usage method

1. Lightly brush the entire shoe with a large shoe brush to see if the protruding part of the shoe edge is contaminated with dirt.

2. Use small shoes to brush away dirt and fine dust on the concave and convex parts such as the shoe edge or joint.

3. Loosen the shoelace, and then brush away the dirt that is not easy to see from the outside.

4. Squeeze a little cleaning oil on the cloth and coat the whole shoe. At this time, the most important thing is to thoroughly remove the old shoe oil left on the shoe

Clean.

5. Take another piece of cloth (not to be mixed with the cloth using cleaning oil), dip a little shoe polish on it, and coat the whole shoe. The amount of shoe polish is about the size of the little finger.

6. After coating the whole shoe, polish the whole shoe with a clean soft cloth. The details should not be sloppy.

7. Finally spray waterproof fog. The waterproof fog can not only prevent the shoes from being attacked by water, but also has the effect of not easily contaminated with dirt. After the waterproof fog is dry, put the last into the shoe.