Bumper stickers are a way to decorate and protect the car body. They are attached to the bumper to achieve the effect of beauty and protection. The specially treated material has strong weather resistance and UV resistance, and can be used for a long time in outdoor environment without fading or falling off. These stickers usually use special glue to firmly stick to the surface of the car body without damaging the paint.

Installation steps of car bumper stickers

‌Preliminary preparation‌: Make sure the car body is dry and clean so that the sticker can adhere better. Prepare necessary tools such as rags, scrapers or credit cards.

‌Determine the position‌: Cut according to the contour and size of the bumper to obtain a better fit.

‌Stickers process‌: Use the method of sticking while scraping with tools and peeling off the backing paper, or for small graphics, you can tear off the transparent transfer film and stickers before sticking, but be careful to prevent accidental adhesion.

‌Post-processing‌: After sticking, you need to scrape and press several times to ensure that the sticker fits tightly to the car body. Then tear off the transparent transfer film, cut a knife at the appropriate position with a utility knife, and apply it inward. Finally, carefully check whether the sticker is separated or protruded from the car body. If there is, it needs to be handled in time.

Whether the sticker on the car bumper can pass the annual inspection depends mainly on whether the area of ​​the sticker exceeds 30% of the car body and whether it is in the form of advertising.

If the area of ​​the sticker on the car bumper does not exceed 30% of the car body and is not in the form of advertising, then these stickers can pass the annual inspection normally. However, if the area of ​​the sticker exceeds 30% of the car body, it will be considered as privately changing the appearance of the vehicle. In this case, the owner needs to go to the vehicle management office for filing and exchange for a new driving license. If it is not filed, it will be regarded as illegal modification, which may cause the vehicle to fail the annual inspection.

In addition, there are some special regulations to pay attention to. For example, special colors for special vehicles, such as red for firefighting, yellow for engineering rescue, and white and blue on the top for national administrative law enforcement, these special colors for special vehicles are not allowed to be pasted on ordinary family cars. If the sticker affects driving safety, such as blocking the view or affecting the judgment of other vehicles, such sticker will not pass the annual inspection.