Green Valley Tongtai Integrated Wastewater Treatment Equipment Introduction

1. Product Overview

Green Valley Tongtai integrated wastewater treatment equipment is a standardized, high-efficiency water treatment product independently developed and produced for multi-scenario sewage discharge demand. The equipment adopts an integrated integrated design, integrates the core processes of water quality adjustment, physical filtration, biochemical treatment and advanced purification, with small floor area, short installation cycle, low operating cost and stable effluent quality, which can meet the discharge and reuse requirements of different types of wastewater.

At present, this series of equipment has been applied in many fields such as domestic sewage treatment, industrial wastewater treatment, reclaimed water reuse and car washing wastewater recycling, which can effectively help all kinds of users to complete up-to-standard discharge of sewage and realize recycling of water resources.

2. Applicable Scope

This series of integrated wastewater treatment equipment is suitable for the following types of wastewater treatment:

1. Domestic sewage: Distributed domestic sewage from residential quarters, scenic spots, highway service areas, rural collective residences, hotels, restaurants, office buildings and other places.

2. Industrial wastewater: Low-to-medium concentration organic industrial wastewater that can be treated by biochemical process, meet the access standards stipulated in the operation specifications.

3. Reuse of reclaimed water: Advanced treatment of treated sewage to meet the water quality standards for reuse in miscellaneous urban water, greening irrigation, production cooling and other scenarios.

4. Car washing wastewater: Treatment and recycling of car washing wastewater in car beauty shops, 4S shops, public car washing stations and other places, realize circular reuse of water resources.

3. Core Technical Parameters

Processing Capacity Range	[1m³/d - 500m³/d] (can be customized according to demand)
Design Inlet COD Range	≤500mg/L (domestic sewage), ≤1000mg/L (adjustable for special industrial wastewater)
Effluent Quality Standard	Can meet [local discharge standard]/reuse standard, the specific index can be customized
Equipment Material	Carbon steel anti-corrosion/stainless steel [optional]
Operation Mode	Automatic continuous operation / intermittent operation adjustable
Power Supply Requirement	380V AC, 50Hz [can be adjusted according to local power supply standard]
Installation Method	Buried / above-ground / semi-buried optional

4. Product Features

1. Integrated design, small floor space:All treatment units are integrated in one equipment body, no need to build multiple concrete treatment structures, which saves floor area and civil engineering cost, and can adapt to limited site conditions.

2. High degree of automation, low operation and maintenance cost:Equipped with automatic control system, which can realize automatic operation of water intake, aeration, sludge discharge and other links, no need for special personnel on duty, reduce labor input.

3. Strong adaptability, stable treatment effect:The combined process route can adjust the treatment unit according to different water quality and water volume, with strong impact load resistance, and the effluent quality is stable and up to standard for a long time.

4. Corrosion-resistant material, long service life:The main body of the equipment adopts professional anti-corrosion treatment, which can resist the corrosion of sewage and gas, and the design service life can reach more than 15 years under normal use conditions.

5. Energy saving and consumption reduction, support resource reuse:Adopt high-efficiency energy-saving aeration and power distribution system, with low energy consumption. After treatment, the effluent can meet the reuse standard, which is convenient for users to realize recycling of water resources and reduce water cost.

5. Installation Steps

Step 1: Site preparation: Prepare the site according to the equipment dimension drawing provided by the manufacturer, level the foundation, and prepare the supporting foundation for buried or above-ground installation as required.

Step 2: Hoisting and positioning: Hoist the integrated equipment to the designated installation position through hoisting equipment, check whether the horizontal and position dimensions meet the design requirements, and fix it.

Step 3: Pipeline connection: Connect the water inlet pipe, outlet pipe, sludge discharge pipe, aeration pipeline and other supporting pipelines according to the process flow diagram, check the tightness of the connection to ensure no leakage.

Step 4: Electrical connection: Connect the equipment power supply and control circuit by professional electricians, check the insulation and steering of each electrical component, and debug the automatic control system.

Step 5: Commissioning and trial operation: Inject water into the equipment, put in activated sludge or strains according to the process requirements, carry out aeration culture and trial operation, adjust the operating parameters until the effluent quality reaches the standard, and the installation and commissioning are completed.

6. Notes

1. The inlet water quality shall meet the equipment design requirements, and it is strictly forbidden to discharge sewage containing toxic and harmful substances, high-concentration grease, a large amount of solid sediment and other pollutants that do not meet the access standards into the equipment, so as to avoid damage to the treatment system.

2. Regular inspection and maintenance shall be carried out: check the operating status of aeration system, water pump, control system and other components regularly, remove excess sludge regularly, and replace wearing parts as required to ensure long-term stable operation of the equipment.

3. In low temperature environment in winter, corresponding thermal insulation measures shall be taken according to the requirements of the manual to ensure that the biochemical treatment system can operate normally.

4. Installation, commissioning and maintenance shall be carried out by professionals, and it is strictly forbidden to disassemble the equipment and adjust the process parameters without authorization, so as to avoid safety accidents and treatment system failure.

Reminder:If you need detailed parameters, quotation or after-sales service of this product, please contact Green Valley Tongtai official customer service for consultation.