Product Description

DG100 - Drum Gauge Level Indicator

2) Gauge accepts a ." faucet (sold separately). 18-3/8" site gauge. For use with plastic or steel drums.

3) Drum Gages can be used to determine the level and condition of liquids stored in steel drums. Oils, solvents, chemicals, water, and many other fluids may be used with Drum Gages. 4) Drum Gages are suitable for indoor or outdoor use and provide instant visual checks with extreme accuracy. This Drum Gage is sold without a faucet. The 1/2” diameter glass sight on the liquid level gage is protected on three sides by rust-resistant plated steel. A protected vent hole in the aluminum cap reduces the possibility of dust, dirt, or moisture getting inside the gage. The gage uses atmospheric pressure. Leak-tight construction is achieved with Buna-N seals. The iron tee has a ¾” female NPT for attaching a faucet. There is a ¾” male NPT mounting thread that connects to the drum. The unit tolerates temperatures up to 225° F. The length from the center of the mounting hole to the top of the viewable portion of the glass sight is 18 3/8”. The total height of the unit is 23 1/32”. Dimensions: A. Height from Center of Mounting Hole to Top of Viewable Glass 18 3/8" B. Height from Center of Mounting Hole to Top of Gage 21 13/32" Total Height 22 13/32" Standard Packing: 20pcs/ctn, NW: 18.0kgs, GW: 19.0kgs, Cuft: 1.4'