ASME B16.9 Eccentric Reducer 12"x10" SCH40 Seamless Hot Pushed A234 WPB Butt Weld Pipe Fitting

Product description

ASME B16.9 Eccentric Reducer 12"x10" SCH40 Seamless Hot Pushed A234 WPB Butt Weld Pipe Fitting

This ASME B16.9 eccentric reducer is manufactured by seamless hot pushing process from ASTM A234 WPB carbon steel, connecting a 12″ (DN300, OD 323.9 mm) pipe to a 10″ (DN250, OD 273.0 mm) line. With SCH40 wall thickness, 203 mm end-to-end length and 30°–37.5° bevel ends, it is designed for butt-welded installation in oil & gas, petrochemical and power piping systems. The eccentric design keeps one side of the pipe run straight, preventing gas pockets in liquid lines (bottom flat) or liquid accumulation in gas lines (top flat). Each piece is supplied with dimensional inspection report, NDT results where required, and EN 10204 3.1 material certificate.

  • Seamless hot-pushed body with no weld seam; pressure and fatigue performance close to the mother pipe
  • D1/D2/H dimensions controlled strictly to ASME B16.9; correct fit-up on site at the first attempt
  • Actual measured 9.53 mm SCH40 wall at the large end; no thinning shortcuts
  • Eccentric orientation customizable as bottom flat or top flat, marked TOP/BOTTOM at the factory to prevent wrong installation
  • Third-party witnessed inspection (SGS / BV / TUV) and 3.1 material certificate available
  • ASME B16.9 eccentric reducer, DN300×DN250, SCH40 wall thickness, formed by hot pushing from seamless steel pipe, in ASTM A234 WPB carbon steel, with standard butt-weld bevels at both ends. The eccentric design keeps one generatrix straight. In horizontal piping, it can be specified as bottom flat to prevent gas pockets in liquid service, or top flat to prevent liquid accumulation in gas service. It is widely used for diameter transitions in oil and gas gathering, refining units, power plant piping and large water treatment projects. Every piece is inspected for outside diameter, length, wall thickness and ovality, and can be supplied with a 3.1 material certificate and NDT reports.

Previous:CTC Ceylon Black Tea for Bubble Tea Base, Bulk Milk Tea Raw Material

Next:SCH40 Concentric Reducer, ASME B16.9 American Standard Concentric Reducer / Welded Concentric Reducer

Company profile

Hebei Renlong Pipe Fittings Co., Ltd.

Learn more

Recommended products

Contact Now