Product Description

Delivery Time:This is advantaged product, we have it in stock.
Certification:ISO9001

1-(2,3-Dichlorophenyl)piperazine hydrochloride Pharmaceutical Intermediates CAS NO 119532-26-2,41202-77-1 99%

Quick Detail:

Name	1-(2,3-Dichlorophenyl)piperazine hydrochloride	Appearance	White or off-white crystalline powder
Assay:	≥99.0	Solubility(1.0% aq.)
Loss on drying,%	≤0.5	BP
MP/℃	245-247°C	Ignition residue,%	≤0.1

Description:

> Formula:C10H13Cl3N2

> Weight: 267.58

> Appearance: White or off-white crystalline powder

> MP:245-247°C

> Storage:Preserved in a well-closed container and keep in cool, dry place

> Danger Description:R36/37/38

> Safety Description:S26-36

> Danger Symbol:Xi

> Shelf life:two years

Specifications

Assay	≥99.0
MP,℃	245-247°C
Loss on drying,%	≤0.5
PH(1% aq.)
Ignition residue,%	≤0.1
Solubility(1.0% aq.)
Chloride ,%
Ultraviolet absorbance/280nm(55% aq.)
Dicyandiamide,%
Melamine,%
Iron,ppm
shelf life	two years

Synonyms:

TIMTEC-BB SBB003054;RARECHEM AH CK 0082;PIPERAZINE, 1-(2,3-DICHLOROPHENYL)-,HYDROCHLORIDE;N-(2,3-DICHLOROPHENYL)PIPERAZINE;N-(2,3-DICHLOROPHENYL)PIPERAZINE MONOHYDROCHLORIDE;N-(2,3-DICHLOROPHENYL)PIPERAZINE HYDROCHLORIDE;N-(2,3-DICHLOROPHENYL) PIPERAZINE HCL;1-(2,3-DICHLOROPHENYL)PIPERAZINE;

Related categories:Piperazines;Piperidines, Piperidones, Piperazines;INTERMEDIATESOFARIPIPRAZOLE;Piperaizine;API intermediates;Intermediates of Aripiprazole;Building Blocks;Halogenated Heterocycles;Heterocyclic Building Blocks;PiperazinesHeterocyclic Building Blocks;Aromatics;Heterocycles;Intermediates & Fine Chemicals;Pharmaceuticals;For Aripiprazol\'s production;NULL

Related Products:

Determination of melting point

Instrument:

Micro melting point apparatus WRS-2A, Melting point tubes

Determination of step:

Open switch, stable 20min.

First set the starting temperature than the melting point of the low 10 ℃, heating rate 2 ℃ / min.

The sample was grind as fine as possible and load in a clean, dry melting point pipe ,until the sample was compressed into about 1cm high .When the actual temperature reaches the set temperature and stabilized . Inserted into the capillary with the sample, the simultaneous determination of three.

The determination of Loss on drying

Weigh a sample of approximately 2g (weighing accuracy 0.0001g),Record the weight of m,The sample was placed in a Petri dish constant weight (weight recorded as m0), the tile, the thickness of not more than 5mm, into the oven (As next dish cover removed) drying at 105-110 ℃ 3 hours.When removing, make sure the dish cover,be placed in a desiccator to cool, then weighed and the weight (including surface dish) m1.

Loss on drying in accordance with the following formula:

Where:

m-- sample, g

m0-- dish, g

m1-- After drying the quality of the sample and the dish, g

The determination of residue on ignition

First the Griddle was burning 30 minutes at 600 ± 50 ℃, cooled and then weighed on a silica gel drier.Taking 1g sample was placed in a crucible and weighed, with 2ml sulfuric acid (5.5ml98% sulfuric acid diluted to 100ml) wetting the sample which was slowly heated until the sample completely low zoom.Cooling,using 2ml sulfuric acid (5.5ml98% sulfuric acid diluted to 100ml) to wet the sample, which was slowly heated until no white smoke, and then placed at 600 ±50℃ calcined to obtain the residue, to ensure that the entire process does not produce white smoke.Cooling Griddle silica gel dryer and then weighed to calculate the mass of the residue.