Delivery Time:20 - 28 days
Certification:CE / ISO / FDA

Excellent Ventilation Bone Fracture Molding Orthopedic Fiberglass Casting Splint

 
Orthopedic  Polyester Cast  and Splint  is moisture resistant , lightweight , strong , breathable , X-ray translucent , durable and can be removed easily .

Orthopedic  Polyester Cast  and Splint  ,  with its excellent flexibility and compactibility ,  is easy and simple to use for patients

*    Materials : Polyester or fiberglass fabric , Polyurethane

*    Environmetal , fully burning and less pollution

*   Application : Used for the external fixation of fracture and common orthopedics

*   Shape : customized

Advantage

1.  Excellent X - Ray Radiolucency

2.  Good air-permeability

3.  High strength and light weight

4.  Environmental friendly material

5.  Easy Operationn and Remove

6.  Remove generate lower dust than plaster cast

Item	Size	Packing	Operating Part
Orthopedic Fiberglass Splint	7.5cm x 30cm	6 boxes 20 pcs	Forearm
Orthopedic Fiberglass Splint	7.5cm x 90cm	6 boxes of 10 pcs	Upper arm
Orthopedic Fiberglass Splint	10cm x 40cm	6 boxes of 20 pcs	Forearm
Orthopedic Fiberglass Splint	10cm x 50cm	6 boxes of 10 pcs	Shank
Orthopedic Fiberglass Splint	10cm x 75cm	6 boxes of 10 pcs	Shank
Orthopedic Fiberglass Splint	10cm x 60cm	6 boxes of 10 pcs	Shank
Orthopedic Fiberglass Splint	12.5cm x 75cm	6 boxes of 10 pcs	Shank
Orthopedic Fiberglass Splint	12.5cm x 115cm	6 boxes of 5pcs	Thigh
Orthopedic Fiberglass Splint	15cm x 75cm	6 boxes of 10 pcs	Lower Limb
Orthopedic Fiberglass Splint	15cm x 115cm	6 boxes of 5pcs	Lower Limb

 Storage

Unopened  Orthopedic Cast Splint should be stored in a cool dry atmosphere at room temperature of 15 to 30℃ .

Higher or lower temperature may affect the shelf life of three years after the manufacture . Care should be taken to avoid punching and damaging the pouch ,  which will cause the premature hardening of the orthopedic products ( for the roll type orthopedic splint ,  it should be used up within one month after resealing the pouch ) .

Operation of Orthopedic Cast Splint

1.  Select proper size of splint according to different parts of body ;

2.  The package , immerse the splint in room temperature water ( 21 - 24 degrees )  for 4 - 6 seconds and squeeze it 2 - 3 times ;

3.  Take it out and squeeze or wipe out excess water by using dry towel ;

4.  Use the splint to cover the fixed part andwrap it by gauze bandage or elastic bandage to secure and mold it freely ;

5  Splint can be removed with common scissors .

Note :

1.  Be Careful Not To Break The Package .

2.  Store SENBONI Splint & Bandage At Room Temperature .

3.  Quality Guarantee Period : 3 years 

Precaution

1.    Each orthopedic splint roll should be gently squeezed to the opening for checking suitability for application . Unopened rolls should be soft and flexible . Do not use the roll that feels hard ( for the roll type splint , if the edge is hardened after reselling , cut off the hardened part and use the remaining soft part ) .

2.    Wearing surgical gloves is not need for handling the orthopedic splint . But the polyurethane resin could adhere firmly to unprotected skin ,  hair and clothing , and may cause a mild irritation . Therefore , always wear protective gloves to apply and use alcohol or acetone before removing the polymer .

3.    Uncomfortable increase of heat can be caused during hardening by excessive layering of tape or immersing in water at temperature above 27℃ .

4.    All application of these orthopedic products should be followed according to instructions of doctors or qualified medical professionals .

5.    Orthopedic Products should be stored out of reach of children .

Sample Policy :

1. Sample according to your design drawing . Sampling time :3 - 5 days .

2. Design your own sample , then remake it .

3. Existing Samples Sampling time  : 1day

4. Make mass production after your confirm the sample .

Quality Control :

1. We will not start to make the products unti