Delivery Time:20 - 28 days
Certification:CE / ISO / FDA

 Light Weight Strong Moulding Bone Care Orthopedic Polyester Cast  and Splint 

 
Orthopedic  Polyester Cast  and Splint  is moisture resistant , lightweight , strong , breathable , X-ray translucent , durable and can be removed easily .

Orthopedic  Polyester Cast  and Splint  ,  with its excellent flexibility and compactibility ,  is easy and simple to use for patients

Description

Orthopedic splint is composed by manifold layers of orthopedic casting tapes and specially nonwoven fabric .

Tt is characterize by better viscosity , fast drying time , high rigidness and light weight . Dure to better biocompatibility , polyurethane is widely used in medical fields .

Animal study and acute and chronic toxicity test have proved that medical polyurethane is non-toxic and no teratogenecity , no local irritation and no anaphylactic reaction .

Advantage

1)  Simple operation : Room temperature operation , short time , good molding feature

2)  High hardness & light weight 20 times hard than plaster splint ; light material and use less than         plaster splint ;

     Its weight is plasters 1 / 5 and its width is plasters 1 / 3 , which could reduce wound burden

3)  lacunary ( many holes structure ) for excellent ventilation

     Unique knitted net structure make sure good air ventilation and prevent skin damp and hot & pruritus .

4)  Rapid ossification ( concretion )

      It ossifies in 3 - 5 minutes after open the package and could bear weight after 20 minutes , But plaster       splint need 24 hours for full concretion

5)  Excellent X-ray penetration

      Good x-ray penetration ability makes X-ray photo clearly without remove the bandage ,  but plaster          bandage need remove to make x-ray inspection .

6)  Good waterproofing quality

     The moisture - absorbed percent is 85 % less than plaster splint , Even the patient touch the water            situation , it still could keep dry in the injury position

7)  Convenient operation & mold easily .

8)  Comfortable & safe to patient / doctor

    Material is friendly to operator and it wont become tension after concretion.

9)  Wide application

10)  Environment friendly

       Material are environmental friendly , which could not produce polluted gas after inflammation .

Item	Size	Packing	Operating Part
Orthopedic Fiberglass Splint	7.5cm x 30cm	6 boxes 20 pcs	Forearm
Orthopedic Fiberglass Splint	7.5cm x 90cm	6 boxes of 10 pcs	Upper arm
Orthopedic Fiberglass Splint	10cm x 40cm	6 boxes of 20 pcs	Forearm
Orthopedic Fiberglass Splint	10cm x 50cm	6 boxes of 10 pcs	Shank
Orthopedic Fiberglass Splint	10cm x 75cm	6 boxes of 10 pcs	Shank
Orthopedic Fiberglass Splint	10cm x 60cm	6 boxes of 10 pcs	Shank
Orthopedic Fiberglass Splint	12.5cm x 75cm	6 boxes of 10 pcs	Shank
Orthopedic Fiberglass Splint	12.5cm x 115cm	6 boxes of 5pcs	Thigh
Orthopedic Fiberglass Splint	15cm x 75cm	6 boxes of 10 pcs	Lower Limb
Orthopedic Fiberglass Splint	15cm x 115cm	6 boxes of 5pcs	Lower Limb

How to use :

1.  According To The Different Part ,  Choose The Right Specification .

2.  Open The Packaging And Take Out The Splint , Dip In Room Temperature Water At 4 - 8 Seconds .

3.  Take Out Then Pile Out The Excess Moisture Or Use The Dry Towel For Sucking .

4.  Use The Splint To The Fixed Part Which Need To Covering ,  Then Can Be Enwind With Bandage .

5.  According To The Need Of Plasticing .  

Note :

1.  Be Careful Not To Break The Package .

2.  Store SENBONI Splint & Bandage At Room Temperature .

3.  Quality Guarantee Period : 3 years 

Precaution

1.    Each orthopedic splint roll should be gently squeezed to the opening for checking suitability for application . Unopened rolls should be soft and flexible . Do not use the roll that feels hard ( for the roll type splint , if the edge is hardened after reselling , cut off the hardened part and use the remaining soft part ) .

2.    Wearing surgical gloves is not need for handling the orthopedic splint . But the polyurethane resin could