Delivery Time:3-5 days
Certification:CE,FCC,MSDS

Characteristics:

One component, RTV-1, acetic curing; Excellent weatherproofing performance;Good adhesion to various building materials. acetic acid Silicone, low modulus silicone glass glue, use convenient, fast curing; Excellent weathering resistance; For a variety of building materials have good adhesive sealing; With a transparent, white, silver grey, black and other colors, user\'s other colors are available.

 

Purpose:

1,The large glass plate assembly. Glass skylight joints sealing.

2, The point fixed and fully transparent glass curtain wall assembly.

3,The glass joints sealing.

Glass joint :

Restriction of Usage:

Cannot be used as structural sealant;

Not compatible with the materials of grease or exudation;

Unsuitable for airproof location, for it requires absorbing moisture in air to cure;

Unsuitable for frosty or moist surface;

Unsuitable for continually flooding or entire-year moist place;

Corrosive to the materials of concrete, porosint stone, zinc and iron;

Cannot be used when the substrate temperature is under 6℃or above 40℃.

Main Technology Data:

Performance	Standard	Measured Value	Performance	Standard	Measured Value	Testing Method
Slumpability	Horizontal	Not change shape	Not change shape	Thermogravimetry(%)	≤10	7.5	GB/T 13477
Vertical(mm)	≤3	0	Tensile Modulus Mpa	>0.4	0.51	GB/T 13477
Extrusion ml/min		≥80	400	Tensile proper	No damage	No damage	GB/T 13477
Skin time min		≤180	12	Tensile recovery rate	≥80	94	GB/T 13477
Hardness(HsA)		20 - 60	27	Storage	9 months shelf life if stored below 27℃ in cool and dry place after production.

Standard: GB/T14683-2003 

Restriction of Usage:   

1, Unsuitable used on the material\'s surface that leaking grease, plasticizer or solvent.  

2, It should be used in the ventilated places, because the silicone sealant need to absorb the moisture 

in the air for drying.

3, Unsuitable used for frost or wet surface.

4, Unsuitable used for metal coated glass assembly

5, Unsuitable used for marble, granite and other alkaline substances joints sealing.

6, Unsuitable for construction on the material\'s surface that the temperature lower 6℃ or higher than 40℃.

 Technology Service

We supply integrate data, technical consultation and free compatibility test.

 Solving problem in the course of using timely

Construction Method:

Please do adhesion test or compatibility test to assure the applicability of product;

Please clean the joint with solvent such as toluene, xylene and acetone, then keep it dry;

Tape is used to cover the edge of the joint to make silicone sealant sealed perfectly, but it cannot contact the sealed surface;

Cut the nozzle at the desired size. Keep good contact between the silicone sealant and joint, and remove the tape before the sealant is cured;  Please keep ventilate for the construction site.

Safety

 Silicone sealant will release volatile compound so that it could be harmful to health, therefore, please keep good and ventilate;

 Silicone sealant will not release any harmful substance and not be harmful to health after cured;

Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash off with running water and consult a doctor;

Warranty

As an ISO9001-2015, ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System.  We will sign the Quality Guarantee