Delivery Time:5-10 days
Certification:ISO/TS16949

Topcoat Paint,  A133 Extra Fine Silver,  A extra fine metallic with a very bright face but a very dark rlop.

Quick Detail:

Product Type	With high-quality low-solvent formulations construction process in the double prime paint silver paint, can provide excellent hiding power and flicker effect silver metallic paint, with a special thinner construction, the better.
Purpose	Polished, completely dry, in good condition original paint, old paint surface and intermediate paint surface.
Substrate	The old paint and all kinds of mediun paint,primer is surface have been hardened and abraded Sand with 600-800#grit paper wet or 400-600# grit paper dry
Mixing Ratio	A133 Extra Fine Silver 100parts Thinner 100parts
Notice	1, read the instructions before construction; 2, with the former the paint and hardener ratio adjusted as required, how much with how much Stir used within 6 hours run out; 3, the construction process to keep dry and clean, non-contact with water, acids, alcohols, bases, etc.; rear drums with paint hardener must Gaiyan avoid jelly scrapped; 4, during the construction and dry, shall not be greater than 85% relative humidity,
Shelf Life	18months if stored in its original sealed cans at 20℃
Packing	1liter , 3.75liter or 5 liter  can

 
Description:
This low temperature baking paint series is used as double-layer top coat. It features accurate colours, high gloss, high hardness and cubic effect. Easy to apply, it is durable and won’t fade easily.

 
Specifications:
Specific Gravity : 0.95±0.05kg/L(Varies with different colours)
Viscosity : 110～130S (spray-4 cups)/ 25℃
Ingredients: self-dry acrylic resin , pigment, auxiliary agent, solvent, pearl powder
Colour: different colours available upon request of customers.

 
Application  Details:
(1) Substrate Treatment
① Wet-sand the middle-coating paint with 800-grit sand paper. When the paint is dry, spray metal colour primer.
② If the there’s old paint film unsuitable for the substrate, it is suggested to use two-component middle-coating blocking primer, otherwise such phenomena as peeling off, bubling and floating would appear.
③ As the metallic paint has a high transparency, usually operators should ensure that the paint film of the middle-coating baking paint is unified in colour and has no sanding mark and grain on it, or the marks and grains would emerge through the metallic paint.
(2) Application Content:
① Dilutiing Proportion: A133 Extra Fine Silver : thinner★=1: 1  (★Make a proper thinner proportion according to different temperatures)
② Spray Viscosity: 15~19S(spray-4 cups)/20℃
③ Spray Pressure:4-5 Pa ;
④ Nozzle Diameter: gravity type 1.2~1.5mm
                                Suction type 1.4-1.6mm
⑤ Spray Coats: 2~3 coats
⑥ Spray Thickness: 15~25μm;
⑦ Waiting Interval: 5~10 minutes; After the final spray, wait 15-20 minutes before spraying a finish varnish.
(3) Colour Flexibility: For repairs, adjust the colour using Huantong 1K Series colour master.
(4) Tool Cleanings: Clean with the thinner.

 
Precautionss:
①  As metallic paint may produce colour difference on the surface due to different film
Thickness and different spraying methods (dry or wet spray), it is suggested to adopt wetter spray application.
② To spray a metallic paint, using our special-designed thinner can get a better effect.
③ The paint film of metallic paint should never exceed 25μm.
④ Spray a finish varnish 15-20 minutes after spraying the metallic paint. The longest interval should never exceed 2 hours.