Delivery Time:within 10 days after getting the original L/C or TT payment

Anionic Softener Compatible With Nonionic Auxiliary AT For Fibres Softening Finishing

Chemical Composition

Special derivative of fatty acid compound

Properties

Impart very soft, Smooth and full handle to fabric

Good hydrophilic, antistatic and low yellowing properties , no influence on whiteness

Compatible with anionic and nonionic auxiliaries except cationic auxiliary 

Technical Specification

Appearance: pale yellow flakes

PH value: 6~8 (5～10% solution)

Ionicity: anionic

Dissolving Method

Temperature raising :  Add the flakes in water(room temperature )gradually in the proportion of  5-10%, stir them and heat up to ( 65~75℃ ) and stir them for 30-60 mins again until the flakes become even paste, then cool it down.

High temperature : Add the flakes in water ( 65~75℃) gradually in the proportion of 5-10%,

stir them for 30-60 mins again until the flakes become even paste, then cool it down.

Field of Application

Applied to softening finishing and hydrophilic finishing of all kinds of fibres , especially for cotton , linen and their blended fabrics 

Application

Padding: Dosage: 20～30g/L(10% solution)          Temperature: 30～40℃

               Process: one dip and one pad or two dips and two pads

Dipping: Dosage: 3～8%(o.w.f)(10% solution)      Liquor ratio: 1:10～15

              Temperature: 40～50℃                     Time: 30min

Storage and Packing

             Shelf life: 12 months when store in cool, dry and shaded warehouse

             Packing: 25kg plastic woven bag