CNC four-roll plate rolling machine is an efficient and precise metal sheet bending and forming equipment, which is widely used in pre-bending and curling of cylindrical and arc-shaped workpieces of various specifications. This equipment realizes automated operation through CNC programming, improves production efficiency and product quality, and reduces costs.

Technical parameters

Maximum roll thickness (mm)	Maximum roll width (mm)	Plate yield limit	Rolling speed (m/min)	Minimum roll diameter at full load (mm)	Upper roller diameter (mm)	Lower roller diameter (mm)	Side roller diameter (mm)	Maximum stroke of side roller (mm)	Side roller adjustment speed (m/min)	Main motor power (kw)
25	2000	245	4	800	350	320	280	240	80	22
20	2500	245	4	640	350	320	280	240	80	30
30	2000	245	4	1000	400	360	300	240	80	37
25	2500	245	4	800	400	360	300	240	80	37
35	2000	245	4	1200	420	380	330	210	80	37
30	2500	245	4	1000	400	360	320	230	80	37
40	2000	245	4	1400	480	400	340	420	80	45
45	2000	245	4	1600	500	450	400	380	80	45
35	2500	245	4	1200	480	400	340	420	80	45
40	2500	245	4	1400	500	450	400	380	80	45
45	2500	245	4	1600	530	480	420	450	80	63
35	3000	245	4	1200	500	450	400	380	80	45
45	3000	245	4	1600	560	500	450	450	80	63
55	2500	245	4	2000	600	550	480	500	78	75
55	3000	245	4	2000	620	560	490	500	78	75
65	3000	245	4	2400	670	600	530	550	78	11

Safety operating procedures

1. The plate rolling machine must be managed by a dedicated person.

2. The operator must be familiar with the structural performance and usage of the plate rolling machine, and can only operate it after the approval of the responsible manager.

3. Before starting the machine, carefully check whether the safety device is intact.

4. During operation, it is strictly forbidden to put hands and feet on the rollers, transmission parts and workpieces.

5. After the work is interrupted, the clutch should be put into neutral.

6. There must be a dedicated person to direct the collaborative work of multiple people.

7. Overload work is strictly prohibited.

8. The lifting and lowering of the upper roller, the tilting and resetting of the flip bearing and the balancing of the upper roller must be carried out after the main transmission is stopped.

9. It is forbidden to pile up workpieces and debris in the workplace, and the machine tool and the site must be kept clean at all times.

10. After the operation is completed, the power supply should be cut off and the power box should be locked

Product Description