Low Noise Home Robot Vacuum Cleaner For wood floor, Autonomous Vacuum Cleaner
Product description
Quick Details
Features:
when battery is going to finish.
waterproof carpet, ceramic tile, under coat carpet and etc;
Specifications:
Diameter(cm): | 30 | Obstacle Avoiding: | Yes |
Height(cm): | 7.5 | AUTO recharge: | Yes |
Charger: | DC24V 600mA | Anti-collision system: | Yes (front 100% anti-collision) |
Battery: | Ni-Mh 14.4v Rechargeable | All floor cleaning: | Wood/Tile/short carpet/stone/linoleum |
Battery Capacity: | 1500MAH | Anti-falling system: | Yes |
Charging Duration: | 4Hours | Time set-up system: | Yes |
Vacuuming Duration: | 90 minutes | LED screen: | LED Touch screen |
Dust tank Capacity: | 0.4L | Side brush function: | Two side brushes |
Noise: | 60dB | Spot clean: | Yes |
Auto-vacuum: | Yes | Mop function: | Yes |
Cleaning route: | Auto / Spot / Edge / Scheduling | System Alarm | Yes |
Filtration system: | HEPA &Primary filter | Remote control: | Yes |
Number of sensor: | 9 | Spray color: | IMD surface |
Obstacle Avoiding: | Yes | Color: | White, Black |
Battery Charging:
Place charging home base against the wall, plug in adapter, and signal light on charging home base will
flash.
Note: Put charging home base against the wall and remove obstacles about 1 meter distance at two sides
and 2 meters ahead.Turn on the power switch on the bottom side of the robot, and then display indicator will
be in gradual blue,the robot is in standby. (If no command received,the robot will turn to sleeping mode
after 30 seconds.)
Note:
A. Please always keep the power switch turning on. If not, it is unable to make the robot work. B. If power switch is turned off, all the scheduled operation will be lost.
C. Before charging the robot, please make sure the power switch is turned on, or else the robot can not be charged.
Charge the robot in either way as shown below:
Plug the adapter into the robot and the
Recommended products