Delivery Time:Within 48hours
Certification:iso9000

Newest BMW Multi Tool V7.3 OBD2 CAS1-4 Key Programmer

 4 Reasons to Get BMW Multi Tool:

1. Language: English

2. Powerful Than AK300!!!

3. Support Encrypt CAS3 and CAS4

4. Software Version: V7.3

Notice:

1. The Encryption Authorization For BMW CAS4 will be cost 550USD if you do not buy IKEYCUTTER CONDOR XC-007 before

2. Make Sure Connect Dongle to Computer Before Run the Software.

BMW Multi Tool Connection Picture

 BMW Multi Tool V7.3 Update:

1. Fix the bug that BMW F Series disable / enable key failure

2. Fix other error.  

BMW Multi Tool V7.2 Update:
 

1.Add change km for CAS4 5M48H(File Change KM->CAS4 (5M48H))

2.Add Disable/Enalbe key for F-Series(Choose BMW F-Series->Key Learn->Enable key/Disable key)

3.For CAS4+ encrypt verison: If you make key with other tool, and the key only have remote, BWM Multi Tool can fix it to working key

4.Normal bugfix

BMW MULTI TOOL V7.0 Update:

1.This verison need newest firmware V1.0.6 support.

2.Support prepare dealer key for CAS4 encrypt verison. Need working key or ISN or DME/DDE dump file support(Need condor automatic key cutting machine authorize and update newest firmware)

3.Fix bug make key for CAS3+ encrypt verison with ISN or DME/DDE dump file.

4.Add support for lost all key with ISTAP4* while not update CAS FLASH. You can find this in File Make dealer key.

5.Improving display in Hungarian  

6.update user manual

7.Normal bugfix

BMW Multi Tool V6.0 Update:

1.Fix bug make dealer key for EWS4
2.Normal bugfix

BMW Multi Tool Description:

1. OBD II CONNECTOR: Connects the tool to the vehicle\'s Data Link connector (DLC).
2. Dongle: USB dongle.
3. USB CONNECTOR: Connects the tool to the PC/Laptop through USB Cable.
4. Programmer: Program keys.
5. Programmer Female Pin: Connects programmer to device.
6. Programmer Male Pin: Connects programmer to device.

BMW Multi Tool Specifications:

1. Operating Temperature: -20 to 70 °C ( -4 to 158 °F )
2. Storage Temperature: -40 to 85 °C ( -40 to 185 °F )
3. Diagnostic Interface: 16 PIN
4. USB Interface: USB 2.0
5. Power: DC 5 V - 12 V
6. Consumption: 1 W

BMW Multi Tool Supported Immobilizer Type and Function

BMW Multi Tool Supported Function Including:

1. Car access sytem dentification

2. Read/Write CAS EEPROM(OBDII)

3. Read/Write KM stored in CAS system(OBDII)

4. Read/Write synchronization codes stored in CAS system(OBDII)

5. Synchronize DME and CAS(OBDII)

6. Synchronize CAS and ELV(OBDII)

7. Prepare dealer key for CAS1/CAS2/CAS3/CAS+(support latest CAS3 verison)(OBDII)

8. Read/Restore CAS KEY information(OBDII)

9. Disable/Enable key with working key(OBDII)

10. Clear DTC and Shadow (OBDII)

11. Prepare dealer key with CAS eeprom dump

12. Unlock dealer key prepared with our software with CAS eeprom dump or KEY information

13. Change KM in CAS and instrument dashboard with file dump

14. Have key programmer, you can programm dealer key directly.

Pay Attention to the Function: Help->Device update.

You can get the latest software version and firmware verion when you can access to internet.

1. Menu:

- Tool: you can choose language here, support \"English\" and \"Chinese Simplified\" Restart software to apply your settings.

- File Make Key: you can prepare dealer key with EWS and CAS EEPROM dump.

- Help: Device update. You can get your device and dongle id version and update it.

2. Protocal Type:

Now BMT support there type of protocol: KWP-CAN BUS 100Kbps, KWP-CAN BUS 500Kbps, KWP-2000. \"Auto Detect \" function can help you to choose the right protocol. After choose protocol okay, then press \"Connect\". If connected success. All CAS info will display in CAS Identification. Include CAS number, VIN, production date, etc.

3. EEPROM Function:

Read EEPROM, Write EEPROM, Save File, Load File…

1). You should backup the CAS EEPROM before prepare dealer key. After succeed read EEPROM, please save it as back file. This step is very important.

2). Now can\'t read the whole EEPROM for cas3 system. But the main section is contained. It should be saved. When you read CAS EEPROM, it will give tips (Press ok to continue).

4. Odometer:

Support read and change KM stored in CAS system.

Don\'t support to change KM in instrument. If you want to change the KM display in instrument. You should change KM in CAS system first. Then modify the KM in instrument manually.

5. Synchronization Codes:

1). CAS3 code-DME, CAS3code-EGS: Read and write DME and EGS code stored in CAS3 system.

2). Synchronize DME and CAS— this function will be useful while prepare dealer key or any