T8004 800 Watt 4-Channel Amplifier The T8004 offers tremendous flexibility when wiring multiple speakers since its designed for lower impedance loads. A natural for powering component speakers, you can also bridge the rear channels to add a 4-ohm DVC subwoofer. A capacitor is recommended. Feature : 1/0 Power & Ground connectors with ANL fusing 12dB or 24dB/octave selectable crossover 2/4 channel switch Audiophile grade amphanol speaker connections Best in class 4 oz. copper traces MasterSync PowerSync Stealth Connections Specification : Number of Channels 4 Rated Power 50 W x 4 @ 4 Ohms RMS 100 W x 4 @ 2 Ohms RMS 200 W x 4 @ 1 Ohms RMS 200 W x 2 @ 4 Ohms bridged RMS 400 W x 2 @ 2 Ohms bridged RMS Total Power 800 Watts Bridgeable Yes Crossover Controls High-Pass (HP): 40-4kHz 12db or 24db/Octave Linkwitz-Riley Low-Pass (LP): 40-4kHz 12db or 24db/Octave Linkwitz-Riley 10x crossover switch Infrasonic filter: 27Hz 12db/Octave Tone Controls Bass: 0dB to +18dB @ 35-70Hz Signal Input Low level: 2 RCA pair Input switch: 2/4 ch. Signal Output Low level: 1 RCA pair Preamp Output Crossover: HP/AP/LP 12db/Octave Butterworth Power Input Connector Block Power Wire Gauge 1/0 AWG Speaker Output Connector Screw terminal barrier strip Speaker Wire Gauge 8 AWG to 18 AWG Heat Sink Type Cast aluminum Cooling Fan Cooled Remote Controls ParaPunch Bass EQ (included with cable) Visual Indicators Power On Thermal Status Speaker Protection Circuit Topology Class Class A/B Frequency Response 20Hz to 20kHz +/- 0.5 dB Dimensions 2.6 x 12.8 x 23 (in) 6.6 x 32.5 x 58.4 (cm) Weight 26 Lbs. (11.8 Kg.)