To bundle goods, pass the belt through the bottom of the ratchet. The groove at the bottom of the ratchet, called the "spindle", is used to fix the length of the webbing. To thread the belt, start under the ratchet and push it up through the spindle. The threaded tape shall then be placed straight and its length shall overlap the second tape on the other side of the ratchet. Continue to pass the strap through the spindle until you feel the tension. Remember, you can tighten it with a ratchet later, so don't worry too much about its length.

Ratchet belt is a fastener used to fix goods during transportation. If used correctly, these belts can support many different weights and cargo sizes. In order to use the ratchet belt correctly, pass the belt through the spindle and turn the ratchet to tighten it. To release the tape, press the release tab and open the ratchet.