Installation instructions

Step 1: Remove the bicycle lock from the shell of the bicycle lock. Step Place the shell on the seat tube facing the rear fender; Place the housing opening upwards. Step 3 Use the tools provided to fix the housing on the mounting point. Tighten all screws to ensure that the housing does not click when riding. Step 4 Insert the lock into the housing and secure it with a rubber strap attached to the top of the housing

When the lock needs to be opened, insert the key into the lock core and turn it clockwise. The rotation angle is limited by the lock core positioning slot. The eccentric shaft behind the lock core rotates in the small rectangular hole on the side of the lock, and the eccentric shaft drives the lock to move upwards {the eccentric shaft and the rectangular hole cooperate to turn the rotation into movement}. The lock moves upward against the pull of the small tension spring under the restriction of the guide plate. When the key is turned to a certain angle, the lock is lifted out of the lock ring tail slot, and the lock ring retracts rapidly into the lock box under the action of the large tension spring, until the lock is opened when the wrench touches the positioning block. After the lock ring is retracted, the lock lock is blocked by the lock ring and cannot fall back to its original position. The lock core is also restricted by the lock lock lock to the position after rotation. The key is stuck by the round bullet in the key tooth and cannot be pulled out of the lock core.