The mixing system generally adopts two types: single axis pear knife type or double axis zero gravity type. Both types of mixers can be used for mortar stations, but in terms of equipment selection, they are also very particular. The single axis pear knife type mixing machine can mix more thoroughly, especially with some very small amounts of additives, so it can be used to produce special mortar. The disadvantage is high cost and low mixing efficiency; The dual axis gravity free mixing host has the characteristics of high mixing accuracy, fast speed, low energy consumption, and sealable operation, making it suitable for the production of ordinary mortar.

The dry powder mortar equipment is also a cement sand filler and additive. The main difference may be that the redispersible rubber powder is prepared for dry powder mortar because it disperses with water and becomes dry powder when there is no water, while on-site mixed mortar does not require redispersible properties The complete set of equipment for dry powder mortar generally has different plans according to requirements and different markets. Commonly used are station layout, staircase layout, tower layout, etc. The general process involves lifting all pre processed raw materials to the top of the raw material silo and relying on their own weight to naturally flow out of the silo. After weighing, batching, mixing, packaging, and other processes, they become the final product. All production is completed under the operation of modern microcomputer control systems. As long as the operator specifies the type and quantity of the product, all other operations are automatically completed by the control system without manual intervention. All production systems and equipment are enclosed, with clean on-site conditions and no dust pollution, ensuring the health of workers. The equipment is of modular structure, with production capacity that can connect with market development, high ingredient accuracy, flexible use, and easy expansion.