The choice of heat source for drying equipment can be hot air furnace, fluidized bed furnace, etc. The cost of a hot air stove is lower, but it needs to burn coal well and will not produce slag; Fluidized bed furnaces have a relatively high cost and can burn coal. The selection of drying equipment is mainly based on the local actual situation. If it is in a coal production area and the environmental requirements are not strict, a fluidized bed furnace can be used.

The dry powder mortar equipment is also a cement sand filler and additive. The main difference may be that the redispersible rubber powder is prepared for dry powder mortar because it disperses with water and becomes dry powder when there is no water, while on-site mixed mortar does not require redispersible properties The complete set of equipment for dry powder mortar generally has different plans according to requirements and different markets. Commonly used are station layout, staircase layout, tower layout, etc. The general process involves lifting all pre processed raw materials to the top of the raw material silo and relying on their own weight to naturally flow out of the silo. After weighing, batching, mixing, packaging, and other processes, they become the final product. All production is completed under the operation of modern microcomputer control systems. As long as the operator specifies the type and quantity of the product, all other operations are automatically completed by the control system without manual intervention. All production systems and equipment are enclosed, with clean on-site conditions and no dust pollution, ensuring the health of workers. The equipment is of modular structure, with production capacity that can connect with market development, high ingredient accuracy, flexible use, and easy expansion.