How to select accessories for aerial work platforms?

Whether it is scissor, articulated boom or telescopic boom aerial work platforms, matching them with the right accessories can not only ensure operational safety, but also extend the service life of the equipment and reduce maintenance costs.

I. Core Principles for Selecting Accessories

1.Safety is the top priority, and standards are the criterion

All accessories must comply with national or industrial safety standards (e.g., GB, EN, etc.). Safety locks shall be accompanied by qualified certificates, and hydraulic hoses shall have pressure test reports. Do not buy unbranded products for the sake of low prices.

2.Compatibility is the most important

Accessories must be fully matched with the model and brand of the platform. The interfaces of hydraulic valves of different brands will also be different. The reason for choosing compatible accessories is to avoid failure in installation or equipment malfunctions.

3.Cost performance is the preferred choice

Cheap accessories may break down in three months and even cause safety accidents; high-quality accessories, though more expensive, have a long service life and few malfunctions, which are more cost-effective in the long run.

II. Selection of Common Core Accessories

1.Safety accessories: Such as safety locks, choose branded products, preferably those with CE certification, and test them by pulling—they should lock quickly without loosening. Platform guardrails shall be at least 1.2 meters high, detachable and installable, made of high-strength steel or aluminum; check if the interfaces are firm and the edges are free of burrs. For emergency descent devices, choose those adapted to hydraulic or electric systems, which can realize smooth descent without power supply. Conduct regular tests to ensure normal operation after power failure.

2.Selection of power and hydraulic accessories: First, for hydraulic pumps or hydraulic valves, choose products with the same specifications as the original ones (consistent pressure and flow parameters), and give priority to branded products to avoid jamming of the boom or oil leakage caused by pressure mismatch. Second, for hydraulic hoses or seals, choose pressure-resistant and anti-aging ones; seals made of polyurethane are more durable than ordinary ones to prevent pipe burst and oil leakage. Finally, for tires, make selection according to working conditions—solid tires for construction sites and mark-free tires for indoor use.

3.Structural and wearing parts: Outriggers or leveling devices shall be equipped with automatic leveling function, suitable for uneven outdoor ground, with a firm locking function. Pin shafts or bearings shall be made of high-strength alloy steel with anti-rust coating on the surface; apply grease during installation to reduce wear and extend service life. For batteries, there are lead-acid batteries and lithium batteries available, and the selection can be made according to the frequency of use.

Summary

In general, the core of selecting accessories for aerial work platforms is safety, compatibility and durability. Select accessories in accordance with the above guidelines to ensure operational safety, and at the same time, make the equipment serve longer and more worry-free. It is best to give priority to branded products—do not cut corners on safety.