How to operate the boom lift?

Boom-type aerial work platforms, whether telescopic boom or articulating boom models, are great helpers for aerial construction. They eliminate the need for scaffolding, and are also flexible and safe to lift and lower. Novices may find operating boom lifts complicated, but in fact, as long as you remember the key points of inspecting the boom lift first, then starting it up, operating it slowly and abiding by the rules, even beginners can master the operation quickly.

First, conduct a careful inspection before use

Whether operating an articulating boom lift or a telescopic boom lift, you must inspect it carefully before starting work. Omission of inspection will likely lead to dangers. Check the outriggers: the outriggers of a boom lift are the solid foundation for safety. First, confirm that the ground is flat and firm, and do not choose soft soil or a slope. Fully extend all outriggers and press the outrigger pads firmly to ensure the body is completely level without shaking or tilting. Inspect the body and accessories: check if the boom has deformation or cracks, if the safety belts and guardrails are intact, and if the door of the working platform can be closed tightly. Inspect the fuel, electricity and control levers: confirm that the fuel and hydraulic oil are sufficient and the battery is charged. Test the control levers and buttons to see if there is jamming and if the movements are smooth. Also inspect the surrounding environment for obstacles, and leave enough space for the boom to rotate and lift.

Second, follow the basic operating steps step by step

The core operating logic of articulating boom lifts and telescopic boom lifts is the same. The only differences are that articulating boom lifts can turn and adapt to complex sites, while telescopic boom lifts can lift higher and have a faster speed. The control panels are located on both the ground console and the working platform console, and operation is available at both positions, which is convenient and safe. For novices, if there is an instructor, you can operate on the working platform console; if there is no instructor, try operating on the ground first, and then move to the working platform console after getting familiar with it. During operation, all movements are controlled by control levers or buttons, and the direction of pushing and pulling the levers is the direction of the boom's movement. Push and pull gently; slow speed ensures precise control and avoids shaking. When moving the boom lift, make sure to retract the boom to its original position and lower it to the minimum height first, then retract the outriggers. Do not drive with the boom raised. After use, lower the platform to the ground first and let the operators get off, then fully retract the boom to be close to the body. Check the platform for bumps and park the lift in an open area.

Selection of articulating boom lifts and telescopic boom lifts

The operation of articulating boom lifts and telescopic boom lifts is almost the same. You only need to choose the suitable model according to the construction site, which will make the operation more worry-free and improve work efficiency greatly.

Articulating boom aerial work platforms can turn and rotate 360 degrees, making them suitable for complex sites such as shopping mall decoration, factory equipment maintenance, and community street lamp maintenance. They are ideal for these scenarios as they can turn behind obstacles and align with the working point accurately.

Telescopic boom aerial work platforms can lift to a great height and the boom extends and retracts quickly, making them suitable for open sites such as construction site operation and outdoor billboard installation. Their straight-up and straight-down operation ensures high efficiency.

Conclusion

In fact, operating a boom lift is not complicated at all. The core points are stability and slowness. Conduct the corresponding inspections before starting work and pay attention to safety during operation. Choosing the right boom lift and using the correct method will make aerial construction both efficient and safe.